ALLOY STEELS, INFLUENCE OF ALLOYING ELEMENTS ON STEEL PROPERTIES

Davulov Shukhrat Bozarovich; Erkinjonov Abdulkhamid

Authors

Davulov Shukhrat Bozarovich, Tashkent State Technical University, Tashkent, Uzbekistan
Erkinjonov Abdulkhamid Andijan Machine-Building Institute, Andijan, Uzbekistan

Abstract

Carbon structural steels do not fully meet the requirements of high accuracy even after heat treatment, small depth of penetration, embrittlement at low temperature, low corrosion tolerance, as well as high thermal expansion coefficient of carbon tool steels, high temperature aggressive environments due to the development of certain new fields such as rocket, jet and nuclear technology, due to the development of certain new fields such as high temperature range, high pressure and aggressive environments, the need for materials increased [1,2].

References

Wang Y. et al. Microstructural evolution, precipitation behavior and mechanical properties of a novel Al–Zn–Mg–Cu–Li–Sc–Zr alloy //Journal of Materials Research. – 2021. – Т. 36. – С. 740-750.

Bektemirov Abdujalol Do‘Smuxammad O‘G‘Li, ., Turakhodjaev Nodir Djaxongirovich, ., Akhunjonov Anvarjon Sobirovich, ., & Erkinjonov Abdulhamid Baxtiyorjon O‘G‘Li, . (2023). TECHNOLOGY OF OBTAINING THE WORKING WHEEL DETAIL WITHOUT IMPACT LOADS BY CASTING. The American Journal of Engineering and Technology, 5(12), 15–20. https://doi.org/10.37547/tajet/Volume05Issue12-04

Abdujalol, B., Nodir, T., Fakhriddin, M., Nuriddin, T., Kamola, T., & Nargiza, S. (2022). Development of steel wheel detail casting technology. Asian Journal of Multidimensional Research, 11(8), 82-88.

Bektemirov, A. D., Turaxodjayev, N. D., & Erkinjonov, A. B. (2023). PO ‘LAT QOTISHMALARINI YEYILISHBARDOSHLIGINI ORTTIRISHDA MODIFIKATSIYALASH TEXNOLOGIYASI: PO ‘LAT QOTISHMALARINI YEYILISHBARDOSHLIGINI ORTTIRISHDA MODIFIKATSIYALASH TEXNOLOGIYASI. [5] Ikromov, Nurillo, et al. "KRISTALLANISH VA QOTISHMALARNING QOTISH JARAYONIDA KOMPONENTLARNING O ‘ZARO TA’SIRI." Theoretical aspects in the formation of pedagogical sciences 1.6 (2022): 39-46. [6] Тураходжаев Н. Д. и др. ОҚ ЧЎЯННИНГ БАРҚАРОР СТРУКТУРАСИНИ ТАЪМИНЛАЙДИГАН ТЕХНОЛОГИЯ ИШЛАБ ЧИҚИШ ВА УНИ ИШЛАБ ЧИҚАРИШ ШАРОИТИДА ЖОРИЙ ҚИЛИШ //Journal of Advances in Engineering Technology. – 2020. – №. 1. – С. 42-49. [7] Turakhodjaev N. et al. Quality improvement of the steel melting technology in an electric arc furnace //ACADEMICIA: An International Multidisciplinary Research Journal. – 2021. – Т. 11. – №. 7. – С. 48-54. [8] Wang, Y., Zhong, F., Wu, R., Wu, H., Turakhodjaev, N., Kudratkhon, B., ... & Zhang, M. (2020). High-strength, ductility and modulus Al–Li/B4C composite with near nanostructure produced by accumulative roll bonding. Journal of Alloys and Compounds, 834, 155105. [9] Turakhodjaev N. D. et al. ANALYSIS OF DEFECTS IN WHITE CAST IRON //Theoretical & Applied Science. – 2020. – №. 6. – С. 675-682. [10] Wang Y. et al. Microstructure and mechanical properties of ultra-lightweight Mg-Li-Al/Al-Li composite produced by accumulative roll bonding at ambient temperature //Materials Science and Engineering: A. – 2020. – Т. 787. – С. 139494. [11] Wang Y. et al. Coarsening kinetics and strengthening mechanisms of core-shell nanoscale precipitates in Al-Li-Yb-Er-Sc-Zr alloy //Journal of Materials Science & Technology. – 2021. – Т. 61. – С. 197-203. [12] Rakhmanov, O., A. Erkinjonov, and A. Bektemirov. "DIAGNOSTICS AND CLASSIFICATION OF FAULTS IN DIESEL ENGINE COMPONENTS USING TIME-FREQUENCY APPROACH AND MACHINE." Open Access Repository 10.12 (2023): 206-223. [13] Turakhodjaev N. et al. EFFECT OF METAL CRYSTALLATION PERIOD ON PRODUCT QUALITY //Theoretical & Applied Science. – 2020. – №. 11. – С. 23-31. [14] Erkinjonov, A., O. Rakhmonov, and S. H. Chorshanbiev. "DEVELOPMENT OF A SECURITY PROGRAM FOR PLACING LOADS ON VEHICLES OF TRANSPORTATION." Open Access Repository 10.12 (2023): 199-205.