YARIM AYLANALI KONSOLLI KOLOSNIKNI TASHQI KUCHLAR TA’SIRIGA BARDOSHLILIGINI MODELLASHTIRISH
Main Article Content
Abstract
Solidworks CAD dasturidan foydalanib takomilashgan yangi yarim aylanali konsolli kolosnikni tashqi kuchlar ta’sirida hosil bo’lgan kuchlanish, ko’chish va defformatsiyalarga bardoshliligi masalasi tadqiq jarayoni yoritilgan.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Wang, Gh., Li, Yx. Development of new ductile iron with super-high thermal conductivity and elongation. J. Iron Steel Res. Int. 29, 462–473 (2022). https://doi.org/10.1007/s42243-021-00581-7
Shuhrat Mamatovich Azizov, Xamit Tursunovich Axmedhodjaev. The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin,” American Journal of Mechanical and Industrial Engineering Volume 1, Issue 3, November 2016, Pages: 103-106. https://doi: 10.11648/j.ajmie.20160103.2
Wang, Yd., Zhang, Lf., Yang, W. et al. Effect of nozzle type on fluid flow, solidification, and solute transport in mold with mold electromagnetic stirring. J. Iron Steel Res. Int. 29, 237–246 (2022).
https://doi.org/10.1007/s42243-021-00577-3
Shuhrat Mamatovich Azizov, Xamit Tursunovich Axmedhodjaev. The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin,” American Journal of Mechanical and Industrial Engineering Volume 1, Issue 3, November 2016, Pages: 103-106. https://doi: 10.11648/j.ajmie.20160103.21
Shuhrat Azizov, Muhammadaminhon Ibrohimov, Farhod Uzoqov and Mirshoroffiddin Mirzakarimov "The modelling and introductions of new type ribs of lattice of the two cylinder of gin". E3S Web Conf., 273 (2021) 07020 https://doi.org/10.1051/e3sconf/202127307020.
Jiang, Db., Zhang, Lf. & Wang, Yd. Effect of mold electromagnetic stirring on solidification structure and solute segregation in continuous casting bloom. J. Iron Steel Res. Int. 29, 124–131 (2022).
https://doi.org/10.1007/s42243-021-00702-2
Azizov Shuhrat Mamatovich, Karimov Abdusamat “Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling,” World Journal of Mechanics, Vol. 1 No. 3, 2011, pp. 122-126. https://doi: 10.4236/wjm.2011.13017
Shuhrat Azizov, Farhod Uzoqov, Mirshoroffiddin Mirzakarimov, Oybek Usmanov. "Analysis of Namangan 77 cotton in production line with different saw gins for short fiber yield". E3S Web Conf., 273 (2021) 07021 https://doi.org/10.1051/e3sconf/202127307021
Azizov Shuhrat Mamatovich. (2022) Calculation Energy of Efficiency New Ginning Machine. Engineering, 14, 163-172. doi: 10.4236/eng.2022.144016.