ANALYSIS OF THE CHEMICAL COMPOSITION OF POLLUTANTS IN THE WORKING FLUID OF HYDRAULIC EXCAVATORS

Article Sidebar

pdf
Published: Feb 21, 2024

Main Article Content

Salimova Shaxrizoda Sanjar kizi
Student of the department of "Mining Electromechanics", Navoi State Mining and Technological University, Navoi, Uzbekistan

Abstract

Recently, the main problem in the operation of hydraulic excavators is the contamination of hydraulic fluids with various minute dust impurities of rocks. As a result, there is a rapid wear of the parts of such machines. The article is devoted to the clarification of the composition of contaminated impurities. Microscopic analysis was used to study the clogging of hydraulic oil. The viscosity of the studied samples after their distillation decreased in comparison with the initial ones.

Article Details

How to Cite
Salimova Shaxrizoda Sanjar kizi. (2024). ANALYSIS OF THE CHEMICAL COMPOSITION OF POLLUTANTS IN THE WORKING FLUID OF HYDRAULIC EXCAVATORS. Proceedings of International Conference on Modern Science and Scientific Studies, 3(3), 1–4. Retrieved from https://econferenceseries.com/index.php/icmsss/article/view/4005
Issue
Vol. 3 No. 3 (2024): SCMS
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

References

Abduazizov N.A., Aliyev T.B. and others. IR spectroscopic analysis of contamination of hydraulic fluid of hydrofected mining machines // Universum: technical sciences. – Moscow, 2019. – No.8. – pp. 35-39.

A.N. Azamatovich, Z.A. Shavkatovich, T.S. Abdumuminovich, and A.S. Xusniddinovich, "Simulation of the Motion of Dusted Air Flows Inside the Air Filter of a Hydraulic System of a Quarry Excavator." International Journal of Grid and Distributed Computing (IJGDC), ISSN: 2005-4262 (Print); 2207-6379 (Online), NADIA, vol. 14, no. 1, pp. 11-18, March 2021.

Abduazizov N.A., Muzaffarov A., Toshov J.B. “A complex of methods for analyzing the working fluid of a hydrostatic power plant for hydraulic mining machines.” // International Journal of Advanced Science and Technology. – India, 2020. – Vol. 29. – №5. – Р. 852-855. (№3. Scopus; № 41. SCImago, impact factor – SJR 2019: 0,11).

Grigoriev M.A., Borisova G.V. Fuel purification in internal combustion engines. – Moscow: Mashino-stroenie, 1991. – 208 p

. 5. Timirkeev R.G., Sapozhnikov V.M. Industrial purity and fine filtration of working fluids of aircraft. – Moscow: Mashinostroenie, 1986. 152 p.

Abduazizov N.A., Toshov J.B. Analysis of the influence of the temperature of the operating liquid on the performance of hydraulic excavators // “GORNIY VESTNIK UZBEKISTANA”, 2019, №3 (78) рр. 89-91

Azamatovich N. et al. INVESTIGATION OF THE INFLUENCE OF THE AMOUNT OF CONTAMINATION OF THE WORKING FLUID ON THE RELIABILITY OF MINING MACHINES //RESEARCH AND EDUCATION. – 2022. – Vol. 1. – No. 8. – pp. 95-103.

Abduazizov N.A. Development of methods to improve the efficiency of quarry hydrofected excavators based on optimization of their hydraulic systems Uzbekistan // Dissertation of the Doctor of Technical Sciences. – Almalyk, 2020. – 200 p.